Garage Steel Frame Kitset 7.2m x 8m A (57.6sqm)
Garage steel frame kitset 7.2m x 8m (57.6m²) — steel framing kit with wall frames, webbed rafters and structural engineer’s PS1 (bracing & truss design) included; cladding and roofing available separately.
Delivery Type : Bundle Pack or Pre Assembled Frames
The Garage Steel Frame Kitset 7.2m x 8m A is a 57.6m² steel framing kit with webbed roof trusses, wall frames and a structural engineer’s PS1 (bracing and truss design) included — a solid single-bay footprint for a larger garage, workshop or vehicle storage build.
At a glance: The Garage Steel Frame Kitset 7.2m x 8m A measures 7.2m x 8m (57.6m²) as a single-bay footprint. The 7.2m x 8m A has a 4800mm wide x 2120mm high garage door opening. It is engineered for wind zones up to High and snow loads of <1kPa. Regular price from $8,581.50 incl GST for the steel frame kit. Summer Sale, 5% off until 31 March 2027: the sale price shows at the top of this page.
Design basis: Standard design suits wind zones up to High and snow loads up to 1 kPa (NASH Standard Part 2, 2019). Tell us your site’s wind and snow zones when you order and we’ll confirm the design suits your site, or adjust it. The engineer’s PS1 for bracing and truss design is included in the price. Foundations and consent are by others.
What’s Included
| Wall frames | Included |
| Webbed rafters | Included |
| Structural engineer’s PS1 (bracing and truss design) | Included |
| Site kit & ancillaries (driver bits, tin snips, galv spray, gloves, assembly screws, thermal packers, bracing hold-down brackets & washers, service hole grommets) | Included |
| Roof-to-wall brackets | Included |
| Construction plans | Included |
| Ceiling battens, roof purlin | Available at additional cost |
| Cladding & roofing | Available at additional cost — ask our team about options |
Specifications
| Product code | GA-7.2×8-A |
| Footprint | 7.2m x 8m (57.6m²) |
| Stud height | 2.42m |
| Roof pitch | 15° |
| Stud spacing | 600mm centres |
| Nog spacing | @1200mm centres |
| Garage door opening | 4.8m W x 2.12m H |
| Wind zone rating | Suitable up to High wind zone |
| Snow load rating | Suitable for snow load <1kPa |
| Bracing | Custom design for your site — let us know your preferred bracing product (product supply excluded) |
Site Suitability & Design Notes
This kitset is engineered to High wind zone and <1kPa snow load as standard, with a structural engineer’s PS1 covering bracing and truss design included in the price — bracing product supply itself is excluded, so let our team know your preferred bracing product for your site. Confirm your own site conditions with our team before ordering, and ask about customising the layout to suit your requirements.
Delivery & Installation
Lead time: Typically under 10 working days from order confirmation, if you approve plans and pay invoices promptly. Your quote confirms the timing for your order.
Delivery: Frames are made at our factory in Waimate and collected by Booths Logistics within 1 working day of your final payment. You can also collect from our Waimate factory.
- Flat pack: delivered free to your nearest Booths depot as a flat bundle pack for you to collect and assemble on site.
- Pre-assembled: ready to stand, with frame-to-frame fixings provided. Freight is extra and quoted for your address. South Island delivery is scheduled within 10 to 14 days of your second invoice.
- North Island: flat pack is delivered free to your nearest Booths depot. For assembled frames, please contact us before placing your order.
Construction Plans
Dimensioned wall and roof frame layout plans for the GA-7.2×8-A are available to download: GA-7.2×8-A Construction Plans (PDF).
Pricing
Pricing covers the steel frame kit and selected add-ons only, and is subject to change — confirm current pricing and freight costs with our team before ordering. Call us on 0800 178 335 for a free, comprehensive quote; our team can also help customise this design to suit your requirements.
Frequently Asked Questions
What’s included with the GA-7.2×8-A garage kitset?
The kit includes wall frames, webbed rafters, construction plans, roof-to-wall brackets, a full site kit of ancillaries, and a structural engineer’s PS1 covering bracing and truss design. Cladding, roofing and additional extras are available at added cost — ask our team for a full package quote.
Does this kitset include engineering/PS1?
Yes — a structural engineer’s PS1 covering bracing and truss design is included. Bracing product supply itself is excluded; let our team know your preferred bracing product when you enquire.
What wind and snow loads is the 7.2m x 8m A rated for?
It’s suitable up to a High wind zone and <1kPa snow load as standard. Confirm your specific site’s zone and loading requirements with our team before ordering.
Can the garage door opening or layout be customised?
Yes — our in-house design team can adjust the door opening, bracing arrangement and overall layout to suit your site and intended use.
How is the GA-7.2×8-A delivered?
Frames are manufactured at our Waimate factory and delivered free to your nearest Booths Logistics depot as a flat bundle pack, or supplied pre-assembled for an additional freight cost — ready to stand with frame-to-frame fixings provided.
$8,581.50 Original price was: $8,581.50.$8,152.43Current price is: $8,152.43. incl. GST
Start With a No-Cost Consultation
Manufacturing Facility
29 Studholme Street Waimate 7924
Email Us
info@steelframeman.co.nz
Call Us
0800 1 STEEL (78335)
Can't find exactly what you're looking for?
Don’t hesitate to reach out to us for personalized custom designs tailored to your unique needs and preferences. Let us bring your vision to life with expert craftsmanship and attention to detail.
Features Of Our LGS Panelling System
See our images below to explore the many indisutry leading features you take advantage of when choosing our cold rolled, light gauge steel panelling system.
You can view and interact with the 3D model of this Frame and Truss panel by clicking here.
1. Dimpled & Swaged Connection
2. Inkjet Printing
3. Service Holes
4. Hold Downs
5. Stud to Track Connection
6. True End Bearing Studs
Video link Here
7. Internal or External Connections
8. Continuous Nogging
9. Truss Mitre
Explore More Products
Steel Frame Manufacturing Ltd 5.4m x 5.5m Garage steel framing kit includes roof rafters, wall frames and ancillaries (brackets, screws, driver bits etc).
$6,154.86 Original price was: $6,154.86.$5,847.12Current price is: $5,847.12. incl. GST
Steel Frame Manufacturing Ltd 4.8m x 5.8m (27.84m2) Garage steel framing kit includes roof rafters, wall frames, brackets, packers and ancillaries (screws, service hole grommets, driver bits etc).
$5,857.24 Original price was: $5,857.24.$5,564.38Current price is: $5,564.38. incl. GST
Steel Frame Manufacturing Ltd 3.8m x 6.3m (23.94m2) Cottage steel framing kit includes roof rafters, wall frames and ancillaries (brackets, screws, driver bits etc).
$5,832.63 Original price was: $5,832.63.$5,541.00Current price is: $5,541.00. incl. GST
Sleepout steel frame kitset 3m x 4m (12m²) with a 600mm front eave — wall frames and roof frames with a 1820mm wide opening in the south wall and a 5.9° mono-pitch roof, designed up to High wind zone.
$2,890.81 Original price was: $2,890.81.$2,746.27Current price is: $2,746.27. incl. GST
Sleepout steel frame kitset 3.0m x 6.0m (18m²) — wall frames and roof frames with a 2400mm wide door opening and a 5.9° mono-pitch roof, designed up to High wind zone.
$3,214.25 Original price was: $3,214.25.$3,053.54Current price is: $3,053.54. incl. GST
Tiny house steel frame kitset 2.95m x 8.0m (23.6m²) — wall frames, roof frames and mezzanine frames with 7° and 11° roof pitches, designed for transportable, trailer-based builds.
$6,581.97 Original price was: $6,581.97.$6,252.87Current price is: $6,252.87. incl. GST
Features Of Our LGS Panelling System
See our images below to explore the many indisutry leading features you take advantage of when choosing our cold rolled, light gauge steel panelling system.
You can view and interact with the 3D model of this Frame and Truss panel by clicking here.



